Solocast Seamless
The seam disappears in the finished panel
Butt two ordinary liner sheets together in the casting bed and the finished panel shows the joint. Solocast Seamless liners are built so that joint does not show in the concrete, which is the age-old precast problem the company is named for.
Who it is for
Precast producers running pattern panels where a visible seam line would fail the finish. If your panels have to read as continuous stone, wood, or a repeating geometric across a long run, the seam is the thing that gives a two-sheet layout away. This system is built to take that tell out of the finished concrete.
What makes it different
- The joint between sheets is engineered to disappear in the cast, not just to line up.
- Starter and ender sheets close out the ends of a run so your crew is not trimming liner in the bed. Less setup, less waste, a bed that turns faster.
- Six foot XXL liners cover more panel per sheet, which means fewer joints to begin with.
- Available across every pattern family, or as a fully custom pattern.
Specs
Spec sheets
Every pattern carries its own spec sheet, with dimensions and joint data. No form to fill out.
| What it is | A pattern formliner system with a joint designed to disappear in the cast panel |
|---|---|
| Use | Single or multi use depending on pattern and material; your rep confirms reuse for the pattern you pick |
| Sheet sizes | Standard sheets plus six foot XXL liners, sized to your bed on order |
| Joint handling | Seamless joint plus starter and ender sheets so nothing is trimmed in the bed |
| Pattern families | Stone, masonry, wood, fluted, and geometric, or a custom pattern |
| Material | Matched to the pattern depth and reuse plan; stated on each pattern spec sheet |
Where to go next
Solocast Seamless
Get a sample or spec help
Tell us about your job and we will send a sample, the spec data you need, or both. Direct from the plant, no runaround.
- Bob · Midwest and Canada · 920-819-9851
- Dawson · Eastern and Western · 715-566-1443