Summitville 510 Olde Charleston thin brick on a finished wall

Summitville logo

Summitville thin brick for precast

See the colors Request samples

Summitville 510 Olde Charleston, Olde Towne.

Distributed by Advanced Formliners.

Summitville colors, by line.

SummitStock colors are marked on the tile.

Filter and compare in the gallery

Wirecut reds and browns.

Wirecut tans, grays and black.

Flashed and blended.

Olde Towne.

Landmark.

Sizes and trim.

From the summitville.com line pages and the trim packaging sheets
Wirecut modular	2-1/4 by 7-5/8 by 9/16 in.
Wirecut utility	3-5/8 by 11-5/8 by 9/16 in. The 2019 specification excludes #10 Summitville Red and #15 Providence from this size.
Olde Towne	Modular 2-1/4 by 7-5/8 by 9/16 in. only.
Landmark	2-1/4 by 7-5/8 by 11/16 in., corners at the same thickness.
Thin Brick Blends	2-1/4 by 7-5/8 by 9/16 in. and 3-5/8 by 11-5/8 by 9/16 in.
Modular trim	BC-248 corner, 2-1/4 by 7-5/8 by 9/16 in. with a 3-5/8 in. return. BT-248 edge cap. BTR-248 and BTL-248 closed corners, right and left.
Utility trim	BC-44C corner, 3-5/8 by 11-5/8 by 9/16 in. with a 3-5/8 in. return.
Other sizes	Full-size brick by custom order to match an existing wall. Special sizes are available, and your rep confirms what the job needs.

PCI and test data.

Summitville meets PCI tolerances and standards. Tumbled and handmade units fall outside PCI tolerances.

What the PCI standard requires Which liner fits your brick

From Summitville Thin Brick Specifications, effective January 2019
Made in	Summitville, Ohio.
Standard	ASTM C1088 Type TBX, Grade Exterior, stated to meet the PCI requirements for embedded thin brick.
Chipping	Under 2%, against a 3% maximum.
Size and warpage	Reported as exceeding the TBX limits.
Modulus of rupture	500 psi, against a 250 psi minimum under ASTM C67.
Compressive strength	10,000 psi, against an 8,000 psi minimum under ASTM C67.
Absorption	Under 6%, against a 17% maximum under ASTM C1088.
Efflorescence	None, under ASTM C67.
Freeze thaw	The brick alone exceeds 50 cycles under ASTM C67. The precast assembly passed 300 cycles under ASTM C666.
Bond	Tensile bond passed at 150 psi before and after 300 cycles, by the PCI modified ASTM E488 method. Shear bond to portland cement above 150 psi under ASTM C482, against a 50 psi minimum.
Chemical resistance	Not affected, under ASTM C650.
Silica	The safety data sheet lists 15% to 25% quartz. Do not dry cut.
Warranty	The limited warranty warrants conformance to ASTM C1088, C67, C482 and C650.

Faces and finishing.

Wirecut	The stock face, run in modular and utility.
Smooth	401 Graphite is the smooth face, and it sits in both the Wirecut and the Blends collections.
Kiln-flashed	Any Wirecut color can be flashed by special order. 14 Alexandria, 17 Yorktown and 97 Valley Forge are the published examples.
Olde Towne	A rustic, kiln-flashed iron-spot face with subtle ranging tones, in the standard modular size.
Landmark	Patterned after 18th-century hand-made brick and molded from brick molds taken from buildings around Hanoverton, Ohio. Each color is a wide range of shades, blended at the factory.
Precision sizing	Any thin brick can be ordered precision sized for the tightest tolerances.
Factory wax	Applied at the factory for precast and tilt-up work, and named as a separate step on the order.
Blends	Mixed from the stocking wirecut colors. Custom blends in every thin brick product.

Packaging.

From the modular, utility and trim packaging sheets and the SummitStock sell sheet
Modular	6.86 pieces per sq ft, 5.65 lb per sq ft, 24 pieces and 3.5 sq ft per tray at 19.75 lb, 3,600 pieces per pallet.
Modular trim	BC-248 corners 12 per tray at 1.13 lb each, 2,160 per pallet. BT-248 edge caps 10 per tray at 1.70 lb each. BTR-248 and BTL-248 closed corners 6 per tray at 2.20 lb each.
Utility	3 pieces per sq ft, 6.48 lb per sq ft, 24 pieces and 8 sq ft per tray at 51.84 lb.
Utility trim	BC-44C corners 7 per tray at 2.20 lb each.
Olde Towne	An archived sheet gives 6.87 pieces per sq ft, 5.7 lb per sq ft, 24 pieces per tray at 20 lb.
Landmark	No packaging sheet is published. Ask your rep.
SummitStock	Stocked colors come as modular flats at 24 per tray and 3,600 per pallet, and corners at 12 per tray and 2,160 per pallet.

Documents.

Published by Summitville and served from summitville.com
Thin brick specifications, January 2019	Open, PDF
Modular packaging	Open, PDF
Modular trim packaging	Open, PDF
Utility packaging	Open, PDF
Utility trim packaging	Open, PDF
SummitStock sell sheet, 2026	Open, PDF
Installation methods	Open, PDF
Cleaning	Open, PDF
Limited warranty	Open, PDF
Safety data sheet	Open, PDF
CSI three-part section	Not published by Summitville. Ask your rep.

Advanced liners for each format.

The formliners tooled for the brick sizes Summitville makes. Each links to its pattern page and its spec sheet.

Format	Bond	Liner	Spec sheet
Modular	Basketweave	Basketweave modular 1900	PDF
Modular	Dutch bond	Dutch bond modular 1500	PDF
Modular	Half bond	Half bond modular 1000	PDF
Modular	Herringbone	Modular herringbone 1400	PDF
Modular	Stacked bond	Stacked bond modular 1750	PDF
Utility	Half bond	Half bond utility 3000	PDF
Utility	Half bond	Half bond utility 3000VS	PDF
Utility	Stacked bond	Stacked bond utility 3750	PDF
Utility	Third bond	Third bond utility 3013	PDF

Price band by size.

Bands run from $ to $$$$ and compare one size with another across every maker Advanced carries. Your rep quotes the job.

Modular	$$. Black colors $$$
Utility	$$$

Draft a specification with Summitville brick.

Six steps to a Section 03 45 00 draft with Summitville already entered as the brick, delivered to your inbox as a Word file. The calculator sizes the order for the same brick.

Draft a specification Brick calculator

Order through your Advanced rep.

Bob Calmes, Midwest and Canada. Dawson Alden, East and West coasts. Say if the face is to be waxed.

Call Bob Calmes, 920-819-9851 Call Dawson Alden, 715-566-1443

Request a Summitville sample.

We ship samples to your plant or your office.

Request a sample Contact a rep