Solocast
Real brick, cast right into the panel
Solocast is the embedded thin brick system. Set your brick in the liner, cast the panel, and the finished wall reads as masonry with none of the masonry labor happening on site. The liner seals around the brick with no ledge, so the mortar joints look right.
Who it is for
Precast producers and tilt-up contractors who need a building to look like brick masonry but want the brick installed in the plant, in the panel, not laid by hand on scaffolding. Solocast holds the brick in place through the pour and releases clean.
What makes it different
- Seals around the brick with no ledge, so the joint between brick and concrete reads as a real mortar line.
- Pairs with thin brick you buy from Advanced, so the liner and the brick are matched from one source.
- Moves brick labor off the job site and into the controlled conditions of the plant.
Specs
Spec sheets
Each brick bond and pattern carries its own spec sheet with sizes and joint data. No form to fill out.
| What it is | An embedded thin brick liner system for precast and tilt-up panels |
|---|---|
| Use | Planned per job; your rep confirms reuse for your brick and panel schedule |
| Brick held | Thin brick set into the liner, cast into the panel face |
| Ledge | Seals around the brick with no ledge, so mortar joints read clean |
| Bond patterns | Running bond, stacked bond, and specialty bonds; see the masonry pattern library for the full lineup |
| Sheet sizes | Sized to your brick coursing and bed; dimensions on each pattern spec sheet |
Solocast
Get a sample or spec help
Tell us about your job and we will send a sample, the spec data you need, or both. Direct from the plant, no runaround.
- Bob · Midwest and Canada · 920-819-9851
- Dawson · Eastern and Western · 715-566-1443